Download Sony Hard Disk Controller Driver

12/10/2021by admin

If your RAID disks are not recognized by the Lazesoft WinPE boot disk, you need to load the proper RAID driver files for your RAID controller.

  1. Download Sony USB Floppy for Windows to uSB driver. Download Sony USB Floppy for Windows to uSB driver. Join or Sign In. Sign in to add and modify your software.
  2. Hard Disk Drivers free download - Flobo Hard Disk Repair, Western Digital Disk Manager Drivers, Disk Drill, and many more programs.
  3. Note that all hard disk controllers provide hard disk status information in single/standalone mode only unless RAID mode is listed for the appropriate hard disk controller (RAID controller). Note: the firmware update for ASMedia ASM1051 USB3.0 bridge may work with enclosures, adapters based on this chip to get the missing status information.

Hard disk controller, known as the adapter of hard disk driver, is the interface device between computers and hard disk driver. Hard disk controller is used to receive and interpret the computer order, and then send various control signals to hard disk adapter. Also, it detects the hard disk driver status.

Hard

Download Sony Hard Disk Controller Driver

Here are the steps to load RAID controller driver files from Lazesoft WinPE boot disk:

Download Sony Hard Disk Controller Drivers

  1. Find RAID controller driver of your computer for Windows Server 2008 R2. (If you do not know how to or cannot find Windows Server 2008 R2 driver for your RAID controller, please feel free to contact us at [email protected]
  2. Download the driver files package or setup file. And then extract the driver files.
  3. Install the new, downloaded version of the Lazesoft Recovery Suite.
  4. Launch the Lazesoft Recovery Suite.
  5. Click <Burn CD/USB Disk> on the home page of Lazesoft Recovery Suite
  6. Click <Options> on the welcome page of the Lazesoft Media Builder.
  7. Enable the option <Specify WinPE Version> and select <Windows 7 64 bit PE> (Windows 7 64 bit has same core with Windows 2008 R2).
  8. Click <OK> to save the options.
  9. Follow the Lazesoft Media Builder ‘wizard’ to create a WinPE boot disk.
  10. Copy the extracted the RAID controller driver files folder to a USB disk.
  11. Insert the USB Disk into your locked/target computer.
  12. Reboot your locked/target computer from the new burned Lazesoft WinPE boot disk
  13. On the home page of Lazesoft Recovery Suite boot disk, click <Load Drivers>, after boot disk is loaded.
  14. Load the driver file, *.inf, from the the extracted the RAID controller driver files folder.

If you do not know how to find and load your RAID drivers, please contact our technical staff with your computer brand name/model number and RAID controller brand name/model number. We will help you find the proper driver files, then reply with detailed steps to download and load RAID drivers.

Printable version

* RECOMMENDED * HPE Smart Array Gen10 Controller Driver for Windows Server 2012 R2 and Windows Server 2016

By downloading, you agree to the terms and conditions of the Hewlett Packard Enterprise Software License Agreement.
Note: Some software requires a valid warranty, current Hewlett Packard Enterprise support contract, or a license fee.

Type:Driver - Storage Controller
Version:100.52.1.64(5 Feb 2018)
Operating System(s):
Microsoft Windows Server 2012 R2
Microsoft Windows Server 2016
Microsoft Windows 10 (64-bit)
Multi-part download
File name:cp032545.compsig (2.0 KB)
File name:cp032545.exe (826 KB)
This component provides support for the HPE Smart Array Gen10 E-series and P-series controllers

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

    • Enhanced controller cache management when doing an OS shutdown, hibernate, or sleep.
    • Enabled PCI Passthrough on Hyper-V.

To ensure the integrity of your download, HPE recommends verifying your results with the following SHA-256 Checksum values:

8a1745bd7baa6a2be5c1f7463268e55751d82698c6f3ab3c115e8e0223a4f056cp032545.compsig
e5ea03f105086191f448fb3e18460d30b9157929572e3bd0578ff5381265a8c2cp032545.exe

Reboot Requirement:
Reboot is required after installation for updates to take effect and hardware stability to be maintained.

Installation:
Download the Smart Component to a directory on your hard drive and change to that directory. The downloaded file is a self-extracting executable with a filename based on the Smart Component Number.

From that drive and directory, execute the downloaded file.

End User License Agreements:
HPE Software License Agreement v1
Hewlett-Packard End User License Agreement

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Version:106.190.4.1062 (21 Dec 2020)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

This release provides the following fixes:

  • Fixed an issue where the early completion of the SRB_FUNCTION_SHUTDOWN SRB is in dump mode

  • The driver was not setting the feature bit to inform the controller to return a unique WWN ID per SATA drive via Inquiry VPD 0x83 rather then returning WWN ID per SAT drive port.

  • While executing HCK CHAOS test, SmartPQI driver crashes with bugcheck 0x7A (KERNEL_DATA_INPAGE_ERROR).

  • While rebooting, the SmartPQI driver crashes with bugcheck 0xD1

  • An issue where Sleep test causes the SmartPQI driver to trigger a bugcheck 0xD1.

  • Fixed an issue while executing driver disable/reinstall, the SmartPQI driver crashes with bugcheck 0xD1

  • Fixed an issue where the application hangs due to lost command. When issuing 'Get-Disk' from Powershell, the command would eventually hang indefinitely.

  • Fixed the registry lookup for determining where I/O is completed was using the string ' SubmitViaStartIo ' instead of ' CompleteIoInDpc '.

  • Fixed an issue where while executing sleep, the windows SmartPQI driver crashes with bugcheck 0x7E.

  • Fixed an issue where the system would BSOD when doing unnecessary initialization of the multi-tag table after declaring controller lockup.

  • Fixed an issue that causes a DRIVER_POWER_STATE_FAILURE BSOD

  • Fixed an issue where assert did not take into account hibernation/sleep mode where the driver limits the max I/O setting.

Added an enhancement to fix the stale Drive fi rm ware version returned by a Power Shell command.


Version:106.178.0.1009 (11 Aug 2020)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Minor fixes required for functionality of FW 3.0

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Smartpqi driver 106.178.0.1009 supports the latest versions of Microsoft Windows OS environments and it is recommended for used with HPE Gen10 Smart Array controllers FW 3.0


Version:106.166.0.1022 (20 Dec 2019)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

  • When executing a “PCS-E2Launch” the system cause stop responding due to the internal controller command accessing the cmdinfo SRB.

Version:106.100.0.1014 (9 Sep 2019)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Fix the following issues:

  • System may become unresposive during initialization of s DC OFF/ON test
  • Corrected a wrong character displayed by Device Manager in a Japanese environment
  • Issue where a PQI reset was sent incorrectly to the controller causing the PNP WHQL test case to fail
  • Data could become inaccesible when a reboot is executed while the controller is in dump mode because the Power SRB completed before the cache flush

Version:106.84.2.64 (2 Apr 2019)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

  • Improved integration with Smart Update Manager

Version:100.62.0.64(A) (27 Nov 2018)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Note: If version 100.62.0.64 was previously installed, then it is not necessary to upgrade to version 100.62.0.64 (A)

Added support for Windows Server 2019.


Version:100.62.0.64 (26 Jun 2018)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

  • Windows 2016 fails cluster validation test.
  • Windows “Removal Policy” incorrectly set to TRUE.

Version:100.52.1.64 (5 Feb 2018)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

    • Enhanced controller cache management when doing an OS shutdown, hibernate, or sleep.
    • Enabled PCI Passthrough on Hyper-V.

Version:63.32.0.64(B) (20 Dec 2017)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Initial driver release for HPE P/E-Class SR Gen10 controllers.

  • Added support for Windows 10 operating system.

Version:63.32.0.64(A) (25 Sep 2017)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Added support for the following Gen10 servers:

  • HPE ProLiant XL190r Gen10 Server
  • HPE ProLiant XL170r Gen10 Server
  • HPE ProLiant DL180 Gen10 Server
  • HPE ProLiant DL160 Gen10 Server
  • HPE ProLiant DL580 Gen10 Server
  • HPE ProLiant ML110 Gen10 Server
  • HPE ProLiant ML350 Gen10 Server
  • HPE ProLiant XL450 Gen10 Server
  • HPE ProLiant DL120 Gen10 Server

Version:63.32.0.64 (12 Jul 2017)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

  • Initial driver release for HPE P/E-Class SR Gen10 controllers.

Type:Driver - Storage Controller
Version:100.52.1.64(5 Feb 2018)
Operating System(s):
Microsoft Windows 10 (64-bit)
Microsoft Windows Server 2012 R2
Microsoft Windows Server 2016

Description

This component provides support for the HPE Smart Array Gen10 E-series and P-series controllers

Enhancements

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

    • Enhanced controller cache management when doing an OS shutdown, hibernate, or sleep.
    • Enabled PCI Passthrough on Hyper-V.

Installation Instructions

To ensure the integrity of your download, HPE recommends verifying your results with the following SHA-256 Checksum values:

8a1745bd7baa6a2be5c1f7463268e55751d82698c6f3ab3c115e8e0223a4f056cp032545.compsig
e5ea03f105086191f448fb3e18460d30b9157929572e3bd0578ff5381265a8c2cp032545.exe

Reboot Requirement:
Reboot is required after installation for updates to take effect and hardware stability to be maintained.

Installation:
Download the Smart Component to a directory on your hard drive and change to that directory. The downloaded file is a self-extracting executable with a filename based on the Smart Component Number.

From that drive and directory, execute the downloaded file.

Release Notes

End User License Agreements:
HPE Software License Agreement v1
Hewlett-Packard End User License Agreement

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Revision History

Version:106.190.4.1062 (21 Dec 2020)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

This release provides the following fixes:

  • Fixed an issue where the early completion of the SRB_FUNCTION_SHUTDOWN SRB is in dump mode

  • The driver was not setting the feature bit to inform the controller to return a unique WWN ID per SATA drive via Inquiry VPD 0x83 rather then returning WWN ID per SAT drive port.

  • While executing HCK CHAOS test, SmartPQI driver crashes with bugcheck 0x7A (KERNEL_DATA_INPAGE_ERROR).

  • While rebooting, the SmartPQI driver crashes with bugcheck 0xD1

  • An issue where Sleep test causes the SmartPQI driver to trigger a bugcheck 0xD1.

  • Fixed an issue while executing driver disable/reinstall, the SmartPQI driver crashes with bugcheck 0xD1

  • Fixed an issue where the application hangs due to lost command. When issuing 'Get-Disk' from Powershell, the command would eventually hang indefinitely.

  • Fixed the registry lookup for determining where I/O is completed was using the string ' SubmitViaStartIo ' instead of ' CompleteIoInDpc '.

  • Fixed an issue where while executing sleep, the windows SmartPQI driver crashes with bugcheck 0x7E.

  • Fixed an issue where the system would BSOD when doing unnecessary initialization of the multi-tag table after declaring controller lockup.

  • Fixed an issue that causes a DRIVER_POWER_STATE_FAILURE BSOD

  • Fixed an issue where assert did not take into account hibernation/sleep mode where the driver limits the max I/O setting.

Added an enhancement to fix the stale Drive fi rm ware version returned by a Power Shell command.


Version:106.178.0.1009 (11 Aug 2020)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Minor fixes required for functionality of FW 3.0

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Smartpqi driver 106.178.0.1009 supports the latest versions of Microsoft Windows OS environments and it is recommended for used with HPE Gen10 Smart Array controllers FW 3.0


Version:106.166.0.1022 (20 Dec 2019)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

  • When executing a “PCS-E2Launch” the system cause stop responding due to the internal controller command accessing the cmdinfo SRB.

Version:106.100.0.1014 (9 Sep 2019)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Fix the following issues:

  • System may become unresposive during initialization of s DC OFF/ON test
  • Corrected a wrong character displayed by Device Manager in a Japanese environment
  • Issue where a PQI reset was sent incorrectly to the controller causing the PNP WHQL test case to fail
  • Data could become inaccesible when a reboot is executed while the controller is in dump mode because the Power SRB completed before the cache flush

Version:106.84.2.64 (2 Apr 2019)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

  • Improved integration with Smart Update Manager

Version:100.62.0.64(A) (27 Nov 2018)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Note: If version 100.62.0.64 was previously installed, then it is not necessary to upgrade to version 100.62.0.64 (A)

Added support for Windows Server 2019.


Version:100.62.0.64 (26 Jun 2018)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

  • Windows 2016 fails cluster validation test.
  • Windows “Removal Policy” incorrectly set to TRUE.

Version:100.52.1.64 (5 Feb 2018)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

    • Enhanced controller cache management when doing an OS shutdown, hibernate, or sleep.
    • Enabled PCI Passthrough on Hyper-V.

Version:63.32.0.64(B) (20 Dec 2017)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Initial driver release for HPE P/E-Class SR Gen10 controllers.

  • Added support for Windows 10 operating system.

Version:63.32.0.64(A) (25 Sep 2017)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Added support for the following Gen10 servers:

  • HPE ProLiant XL190r Gen10 Server
  • HPE ProLiant XL170r Gen10 Server
  • HPE ProLiant DL180 Gen10 Server
  • HPE ProLiant DL160 Gen10 Server
  • HPE ProLiant DL580 Gen10 Server
  • HPE ProLiant ML110 Gen10 Server
  • HPE ProLiant ML350 Gen10 Server
  • HPE ProLiant XL450 Gen10 Server
  • HPE ProLiant DL120 Gen10 Server

Version:63.32.0.64 (12 Jul 2017)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

  • Initial driver release for HPE P/E-Class SR Gen10 controllers.

Download Sony Hard Disk Controller Driver

Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.

Comments are closed.