Download Tandberg SCSI & RAID Devices Driver

12/9/2021by admin


Download Tandberg Scsi & Raid Devices Driver Download

The Tandberg LTO-3 HH delivers a compressed storage capacity of 800GB per data cartridge and a compressed data transfer rate of 432GB per hour, two and a half times faster than the previous generation Ultrium tape drive. The Tandberg LTO-3 HH tape drive is fully write and read compatible with all LTO-2 media and is backward-read compatibility with LTO-1 media.

This driver package supports the operating system/boot device included in the RAID array and standalone NVMe boot device with a separate SATA RAID storage array. Raid driver binary plus the QuickStart guide will assist you with the pre-load RAID during Windows 10 installation on the above AMD Ryzen™ products. The Download tab, select your product from the pull-down list to display the latest drivers available for download. 1.2 Driver Names The following table lists the device driver files for MegaRAID controllers. The driver files are available on the Universal Driver Suite CD that accompanied your MegaRAID controller. LSI updates the MegaRAID. Discuss: Tandberg 220LTO - tape drive - LTO Ultrium - SCSI Series Sign in to comment. Be respectful, keep it civil and stay on topic. We delete comments that violate our policy, which we encourage. Download tandberg backup software for free. System Utilities downloads - Tandberg Data AccuGuard Server for RDX by Data Storage Group, Inc. And many more programs are available for instant and free download.

Download Tandberg SCSI & RAID Devices Driver
  • Capacity: 400 / 800GB* (native/compressed)
  • Performance up to 432 GB/hr* (compressed).
  • Low cost of ownership and low media cost
  • Enterprise features and performance in a small form factor
  • Future proof with 10-generation roadmap
  • Data speed matching, reduces mechanical wear and extends tape life
  • Proven reliability MTBF of 250,000 hrs at 100% duty cycle
  • Low power consumption: 13 W (sleeping mode) and 20 W (operating mode)
  • LTO WORM (write once, read many) for regulatory compliance
  • 3 years advanced replacement warranty

For IT organizations with stringent, long-term data retention requirements, the LTO-3 HH Tape Drive WORM (Write-Once, Read-Many) data protection feature offers a simple and secure method for archiving records allowing customers to affordable meet the toughest industry compliance regulations.


LTO Half Height tape drives employ dynamic data rate matching to adjust to the speed of the host, reducing wear and tear on both drive and media and increasing performance, even on slower hosts. Its ultra-durable soft-load feature automatically positions the data cartridge, and the highly reliable leader-capture mechanism virtually eliminates lost leaders, increasing the success of your backup, archiving and restore operations.

Turnkey Solution

The Tandberg LTO-3 HH ships with Backup Exec QuickStart software, embedded media management for intelligent diagnostics and tape alerts, and comes with 3 years warranty and support. (Backup Exec QuickStart software is only supplied with kitted products)

Media Compatibility

The Tandberg LTO-HH is fully compatible with all industry standard LTO media. To achieve the best reliability, we recommend that customers utilise Tandberg branded LTO media. For more information on media compatibility, click here.

Capacity (native/compressed)400GB / 800GB
Transfer Rate (native/compressed)60 MB/s / 120 MB/s
Dynamic Speed Matching20–60 MB/s / 40–120 MB/s*
Memory Buffer Size128MB
Data Access Speed64 sec.
Data Compression1KB (2:1)
Recording formatLTO Ultrium 3, LTO Ultrium 2, LTO Ultrium 1 (read only)
MTBF Hours (100% duty cycle)250,000 hours @ 100% duty cycle
Head Life60,000 tape running hours
Hard Error Rate1 x 10(-17) bits
Environmental Specifications
Temperature (Operating)50° – 95°F
Temperature (Non-operating)-40° – 151°F
Relative Humidity (Operating)20 – 80% (non-condensing)
Relative Humidity (Non-operating)10 – 95% (non-condensing)
Power Requirements
Idle13 W
Typical20 W
Maximum33 W
Power Supply/ Required (int)5V DC, 2.5A, 12V, 0.7A
CertificationCSA Certification to C22.2, No. 60950 (cCSAus), TUV EN60950 (IEC 60950), CE Declaration of Conformity, FCC 47 CFR Parts 15, NOM,
VCCI. C-TICK, RRL, BSMI, GOSH CB Certificate and Report (IEC 60950)
Warranty3-years Advance Replacement Warranty**
Physical Internal / External (HxWxD)3.3 x 5.7 x 8.2in. (8.5 x 14.5 x 20.7cm) / 4.7 x 8.6 x 11.7in. (12.0 x 21.8 x 29.7 cm)
Shipping Internal / External (HxWxD)10.6 x 10.6 x 13in. (27.0 x 27.0 x 33 cm) / 11 x 12.2 x 15.4in. (28 x 31 x 39 cm)
Weight Out of box, Internal4.94 lb (2.24 kg)
Out of box, External12.28 lb (5.57 kg)
Shipping, Internal7.9 lb (3.6 kg)
Shipping, External16.1 lb (7.3 kg)

* Assumes compression ratio 2:1 on LTO-2/3/4/5 & 2.5:1 on LTO-6/7
** Availability dependent on location

TD LTO Driver_1091Windows WHQL drivers for Tandberg Data LTO-2/3/4/5/6 HH (Server 2008R2/2012/2012R2/2016 and Windows 7/8/8.1/10)
TandbergData_LTO_DriversWindows WHQL drivers for Tandberg Data LTO-2/3/4/5/6 HH (2003/2008/2008R2/2012/2012R2/Vista/7/8/8.1)
TDTool for WindowsTDTool for Windows1.1Utility
TDTool for linux x86TDTool for Linux x861.1Utility
TDTool for linux x64TDTool for Linux x641.1Utility
TDTool for MacTDTool for MAC OSX 10.4+1.1Utility
L&TT_WINLibrary and Tape Tools for WindowsUtility
L&TT_LINUX_X64Library and Tape Tools for LINUX x64Utility
L&TT_LINUX_X86Library and Tape Tools for LINUX x86Utility
L&TT_MACLibrary and Tape Tools for MACUtility
How to choose the correct firmware for LTO-3 HH SAS tape drivesHow to choose the correct firmware for LTO-3 HH SAS Tape Drives1Utility
Q519.eFirmware for LTO3 HH SAS drive (Product No: EB670B#350)Q519Firmware
Visit the Macrium web site
Browse our Support Forum
Complete User Guide

Windows PE (WinPE) is packaged with a large collection of drivers but there are many devices that are not part of the WinPE list of drivers. If your device is not listed you must add its driver so WinPE recognizes it and communicates with your device.

Download tandberg scsi & raid devices driver download

You can run the Create bootable rescue media wizard at any time to check, add or change drivers, if for instance, you have added hardware since creating rescue media.

When you run the Macrium Reflect task, Create bootable Rescue Media the wizard checks whether your device requires drivers adding to WinPE. It builds a list of devices in your computer that are either hard drive/RAID controllers, network interface cards, USB controllers or USB hubs. For each of these devices it checks if:

  • The device is supported by default in WinPE
  • There is a compatible driver in the host operating system
  • There is a compatible driver already present in the collection of drivers on previously created rescue media

Unsupported devices show in the list of devices with a warning icon and a status text of Device Detected.

Note: You do not need to install missing drivers for devices that you do not intend using from WinPE.

Supported devices have a status of either:

  • Device Support in WinPE
  • Compatible Device Support in WinPE
  • Copy Host Driver
  • Driver already present in Drivers folder

Even if a device is supported you can choose to update it and use a different driver, you do not need to use the driver provided by WinPE. Being able to update drivers in this way is useful if you experiencing issues with performing backups or restores in WinPE, for example, if restoring runs slowly from a USB device.

Download Tandberg Scsi & Raid Devices Drivers

Download tandberg scsi & raid devices drivers

Download Tandberg Scsi & Raid Devices Driver Updater

A device driver is a collection of files (also referred to as a driver package) and generally comprises of:

  • The driver software, these files have a .SYS extension.
  • The driver information, or INF, file which contains the installation instructions for the drivers, these files have a .INF extension.
  • An optional security catalog that signs those drivers for operating systems that require signed drivers, commonly used on x64 operating systems, these files have a .CAT extension.
  • One or more optional supporting software library files (Dynamic Link Library) that contain further code to support the driver software, these files have a .DLL extension.

You can find driver install packages in several places. Most manufacturers create a driver folder on the hard drive of a new PC, often named after the manufacturer. If this is not present, you can download drivers from the device or PC vendor's website. For older PCs, manufacturers of devices and motherboards included driver CDs in the packaging, however, these may not be the latest.

Updating drivers

Download Tandberg Scsi & Raid Devices Driver Win 7

  1. Select the driver you want to update, left click it in the list of devices.
  2. Click Update Driver.
    This presents a wizard. This wizard is straightforward to use, the first page prompts you for a folder to scan for drivers and whether you want to include all sub-folders.

  3. Select a folder.
  4. Click Next.
    The wizard scans for drivers, automatically including the host operating system drivers if you do not choose to scan that folder.
  5. When complete a list of results is displayed, select the driver from the list you want to use.
  6. Click Finish.

    The rescue environment driver is copied.

Comments are closed.