Download Thuraya Port Devices Driver

12/9/2021by admin

Welcome to the NETGEAR Download Center!! To find documentation, firmware, software, or other files, enter a whole or partial Model number in the text search box. Enter a Product Name/Model Number. The package provides the installation files for FTDI USB Serial Port Driver version 2.12.16.0. If the driver is already installed on your system, updating (overwrite-installing) may fix various issues, add new functions, or just upgrade to the available version. Having an issue with your display, audio, or touchpad? Whether you're working on an Alienware, Inspiron, Latitude, or other Dell product, driver updates keep your device running at top performance. Step 1: Identify your product above. Step 2: Run the detect drivers scan to see available updates. Step 3: Choose which driver updates to install.

  1. Download Thuraya Port Devices Drivers
  2. Download Thuraya Port Devices Driver Windows 7
  • Land Voice

  • Marine

  • Legacy

Requirements for upgrade:

• Thuraya SatSleeve for iPhone

• SatSleeve upgrader program (available from this page)

• USB data cable (included in your SatSleeve packaging)

• PC with Windows 8/8.1, Windows 7 or Windows Vista

Firmware upgrade

For upgrades related to the SatSleeve for iPhone (Data model) and SatSleeve for iPhone (Voice model), please refer to the relevant sections below. Before upgrading a SatSleeve, please check which firmware is installed (SatSleeve > Settings > Device Info > Firmware version). Perform the upgrade only if Thuraya releases a firmware version newer than your existing one.

SatSleeve for iPhone (Voice & Data model)

Please follow the below steps:

Step 1

Download the below SatSleeve Upgrader program.

Run the setup file - the Upgrader program including the USB driver will be installed.

Step 2

Download the latest Thuraya SatSleeve firmware release to your hard disk.

  • SatSleeve iPhone firmware release v3.0.1
    (works only on the SatSleeve for iPhone Data model)

    Release notes of v3.0.1:
    - Fixed GPS rollover issues

Step 3

Connect your SatSleeve with the PC/laptop via USB data cable.

You can now start the SatSleeve Upgrader program and locate the firmware on your hard disk. The Upgrader program will help you through the upgrade process.

Port

SatSleeve for iPhone (Voice only)

Step 1

Download the below SatSleeve Upgrader program.

Run the setup file - the Upgrader program including the USB driver will be installed.

Step 2

Download the latest Thuraya SatSleeve firmware release to your hard disk.

  • Latest SatSleeve Firmware release 2.5.4
    (works only on the SatSleeve for iPhone Voice model)

Release notes of v2.5.4:
- Fixed GPS rollover issues

Step 3

Connect your SatSleeve with the PC/laptop via USB data cable.

You can now start the SatSleeve Upgrader program and locate the firmware on your hard disk. The Upgrader program will help you through the upgrade process.

Using SatSleeve as Data Modem

For Windows XP, Windows Vista and Windows 7

Step 1

Download the below SatSleeve Upgrader program. This program also contains the required driver for connecting your SatSleeve to a PC or laptop to use the Internet in satellite mode via the SatSleeve.

Run the setup file - the Upgrader program including the USB driver will be installed.

Step 2

Installing the SatSleeve modem on a PC or laptop:

  • Connect your SatSleeve with the PC/laptop via USB data cable
  • Select Start > Settings > Control Panel > System > Device Manager
  • Check the USB serial port of SatSleeve (e.g. COM40)
  • Select Start > Settings > Control Panel > Phoneand Modem
  • Select the Modems tab and press Add
  • Check the box of “Don’t detect my modem; I will select it from a list.” and press Next
  • Select and press Standard 56000 bps Modem and press Next
  • Select the USB serial port that you previously checked on step 3 and press Next
  • When the modem installation is completed, press Finish
Thuraya

Step 3

Creating a dial-up connection:

  • Select Start > Settings > Control Panel > Networkand Sharing Center
  • Select and press Set up a new connection or network
  • Select and press Set up dial-up connectionand then Next
  • Enter *99#on the Dial-up phone number field. (Optionally you can enter user name and password)
  • Enter connection name and press Connect
  • Use the Internet via the newly created dial-up connection.

For Windows 8/8.1

Step 1

Download the below SatSleeve Upgrader program. This program also contains the required driver for connecting your SatSleeve to a PC or laptop to use the Internet in satellite mode via the SatSleeve.

Run the setup file - the Upgrader program including the USB driver will be installed.

Step 2

Installing the SatSleeve modem on a PC or laptop:

  • Connect your SatSleeve with the PC/laptop via USB data cable
  • Select Start > Control Panel > System > Device Manager
  • Check the USB serial port of SatSleeve (e.g. COM40)
  • Select Start > Control Panel > PhoneandModem
  • Select the Modems tab and press Add
  • Check the box of “Don’t detect my modem; I will select it from a list.” and press Next
  • Select and press Standard 56000 bps Modem and press Next
  • Select the USB serial port that you previously checked on step 3 and press Next
  • When the modem installation is completed, press Finish

Step 3

Download Thuraya Port Devices Drivers

Creating a dial-up connection:

Download Thuraya Port Devices Driver Windows 7

Port
  • Select Start > Control Panel > Network and Sharing Center
  • Select and press Set up a new connection or network
  • Select and press Set up dial-up connectionand thenNext
  • Select and press Connect to the Internetand thenNext
  • Select and press No, create a new connectionthenNext
  • Select and press Dial-up ConnectionthenNext
  • Enter *99# on the Dial-up phone number field. (Optionally you can enter user name and password).
  • Enter connection name and press Connect
  • Use the Internet via the newly created dial-up connection.

For Windows 10

  • Select Start > Control Panel > Network and Internet > Network and Sharing Center
  • Select and press Set up a new connection or network
  • Select and press Connect to the Internetand thenNext
  • Select and press Set up a new connection anyway
  • Select and press No, create a new connectionthenNext
  • Select and press Dial-up (Connect using a dial-up modem or ISDN)
  • Enter *99# on the Dial-up phone number field. (Optionally you can enter user name and password).
  • Enter connection name and press Connect
  • Use the Internet via the newly created dial-up connection
Comments are closed.