One-stop shop for fleet efficiency, compliance and productivity. From shippers to drivers, to 3PLs, to motor carriers of all sizes, Trimble MAPS delivers the industry standard truck-specific routing, mileage, mapping and navigation solutions that power the entire supply chain. HomeTrimble Dealer Locator Trimble Dealer Locator. Locate a Trimble Dealer or Sales Contact Near You Find the Applications or Products that works best for your needs.
Whether you're trucking through sub-zero temperatures or a rugged oil-field, invest in hardware you can trust to get the job done.
- Trimble Duo
The Trimble Duo is the latest in-cab innovation from Trimble—a single device that combines an intuitive display with a 4G-LTE-powered vehicle gateway. Gone are the days of complicated and time-consuming installations. With the Trimble Duo, there is no need to install and run cables in the truck’s headliner; the device connects and mounts easily right on your vehicle’s dashboard.
Following is the maximum overall dimensions of the main unit and the antenna module.
Width: 9.0 inches
Height: 6.2 inches
Depth: 1.2 inches
Weight: The maximum weight of the unit is 1.5 lbs.
Internal antennas for the various communications
Size: 7 inches color TFT LCD display
Resolution: WSVGA (1024 x 600) minimum
Brightness: 500 nits minimum
Contrast Ratio: 500:1 minimum
Viewing Angle: Horizontal (left/right) = 70 °/ 70 ° minimum;
Vertical (top/bottom) = 50 °/ 60 ° minimum
Response Time: 20ms maximum over the entire operating
Two USB 2.0 ports will be provided. Following are their location and connector requirements. Located on side of unit.
USB Port 1: Type-A USB port (Client only)
USB Port 2: 5-pin micro-B female connector (Charging only)
1 3FF SIM card slot for the LTE cellular modem
Operating Temperature Range for the System:
–20 °C to +70 °C with external power
–10 °C to +60 °C with battery power
Storage Temperature Range: – 30 °C to +80 °C
Operating Humidity: 0-95% non-condensing
Vibration: The unit will meet the following requirements.
Operational swept sine vibration: SAEJ1455, MIL-STD-202G, Method 201A
Operational Random Vibration: SAEJ1455, MIL-STD-810G, Method 514.6
- Samsung Tab Active 2
Samsung Tab Active 2
Samsung Tab Active 2 is a cost-effective, ruggedized tablet that can withstand the rigors of your fleet’s daily needs and allows drivers to access both Trimble and third-party solutions in and out of the cab.
Screen Size 8.0' / TFT
Resolution: WXGA (1280 x 800)
Brightness: 480 nits
Headphone Out: 3.5mm
LTE Support: LTE Cat 6 (300 Mbps), Supporting Both Verizon and AT&T
Wi-Fi: 802.11 a/b/g/n/ac
Wi-Fi Direct (Wi-Di): Yes
Wireless Mirroring: Yes (Smart View)
Channel Bonding: (2.4GHz + 5.0GHZ) Yes
Antenna: Integrated Bluetooth / Bluetooth Profiles: v.4.2 / A2DP, AVRCP, HFP, HID, HOGP, HSP, MAP, OPP, PAN
Wired LAN / Wireless LAN: Yes / Yes
NFC / GPS: Yes / Yes, with GLONASS
AC Adapter: (VAC/Hz, VDC / A) 120V/60Hz
Battery Capacity: 4,450mAh, User-Replaceable Battery
Battery Type: Li-Polymer
Battery Life Internet Usage Time / Video Playback Time / Music Playback Time: Up to 11 Hrs / Up to 11 Hrs / Up to 78 Hrs3
Charging Time: 160 Minutes
Security: KNOX 2.8 at Launch, Facial Recognition, Fingerprint Reader
Sensors: Face Recognition, Accelerometer, Fingerprint, Gyro, Geomagnetic, Hall, RGB Light, Proximity
Ruggedness: IP68 (Water and Dust Resistant), Anti-shock (Drop from 1.2m Height with Cover)
Certifications: MIL-STD-810G, EPEAT, Energy Start, TCO, RoHS
- Connected Gateway
Connected Gateway is a compact but powerful way to outfit your fleet with tools to help monitor performance, while connecting drivers with the solutions they need to be safe and efficient on the road.
Dimensions: 3.9' W x 1.2' H x 6.1' D
Weight: 1 lb. base configuration
Mounting: Double sided tape with additional adhesive options available
System Memory: 8 GB eMMC Flash, 1 GB DDR3 RAM
Programming: Over the air programming
Single Core CPU: ARM Cortex A9, 800 MHz
Power Operating: 6 – 36 VDC input voltage, max operating
32 VDC (1 minute), 1.0 A max at 12 VDC at power ON state; 2mA max at 12 VDC at power OFF state
Wireless: High-speed 4G LTE connectivity utilizing HSPA+ and Tri Band 3G 850/AWS (1700/2100)/1900
Wi-Fi: Access point for 802.11 b/g/n Wi-Fi in the cab supports connecting to Android Tablet
Cellular Antenna: Internal antenna for the cellular modem, GPS, Wi-Fi and wireless interfaces
Supports: Over the air programming using standardized LINUX update process
GPS Receiver: GPS/GNSS/GLONSS
GPS Antenna: Internal
Accuracy: Within 3 meters CEP (50 percent Circular Error Probability)
- Mobile Gateway
The Mobile Gateway opens up a whole new world of performance for your fleet. Leveraging 4G LTE connectivity, it connects your people, equipment and devices, all the time and everywhere, converting data into actionable information with real-time speed.
Dimensions: 4.8' W x 2.1' H x 7.6' D
Weight: <2 lb. base configuration
Mounting: 4 mounting holes
System Memory: 4 GB eMMC Flash, 256 MB DDR3 RAM,
Programming: Over the Air Programming, Ethernet
Dual Core CPU: ARM Cortex M-4, 167 MHz
Power Operating: 6 - 18 VDC, Max Operating 32 VDC (1 minute), Sleep Mode: lower power consumption, (vehicle) battery primary source of power (<400 mA at 12 VDC).
Deep Sleep Mode: very low power consumption for temporary vehicle storage of extended inactivity (~5 mA)
Wireless: High-speed 4G LTE connectivity utilizing HSPA+/UMTS/GSM, CDMA/EVDO/1XRTT
Wi-Fi: Access point and Client mode support for 802.11 b/g/n Wi-Fi in the cab supports connecting to Android Tablet for driver console
Wi-Fi Hotspot: New data plans, data limits by type, security
Cellular Antenna: 4dbi omni-directional, flexible mount;
on or below (non-conducting surface)
Supports: Over the Air Programming using standardized LINUX update process High-speed connection to Leg
GPS Receiver: 12 channels continuous tracking accuracy: Horizontal: <2 m (50%) and <5 m (90%) Altitude: <4 m (50%) and <8 m (90%)
GPS Antenna: 26db gain, low-profile, active, universal mount
Acquisition: From 32 seconds cold start. Less than 29 seconds warm start (low power idle state). Less than 1 second after temporary signal blockage
Update Rate: Every second
Accuracy: Within 3 meters CEP (50 percent Circular Error Probability) 9-axis IMU: 3-axis accelerometer, 3-axis gyroscope, and 3-axis geomagnetic
GPS fleet tracking software and equipment management services from Trimble offers 360-degree visibility of your operations to help you connect and manage your fleet, equipment, work, and workers intelligently. Increase efficiency with telematics technology.
Get complete visibility of your vehicles, equipment and places. View real-time locations of your equipment alongside your fleet and vehicles. Generate exception alerts based on geofences or asset movement. Monitor equipment utilization and status with our innovative telematics tracking solution.
- Telematics fleet asset tracking
- Mapping and geofences
- Event timeline and travel path
- Location, time, and proximity alerts
- Telematics asset locator app
Use telematics data to monitor everything from location to idle time, maximizing the life and productivity of all your equipment. Connect and manage your mobile assets with equipment monitoring software. View real-time locations of your equipment and vehicles through a modern web and mobile GPS fleet management system interface where users can generate exception alerts based on geofences, fleet usage, or driver behavior. Monitor fleet performance, fuel usage, safety, and compliance.
- Engine hours
- Ignition and running status
- Motion with ignition off alerts
- Battery low or disconnected alerts
- Speeding and idling alerts
- Driver safety scorecards
Use fleet utilization analysis to maximize the the efficiency of your assets and vehicles. Analyze equipment and vehicle utilization within your fleet through an intuitive fleet optimization software that merges, organizes and analyzes data on a real-time basis. View asset usage and idle time through dynamic dashboards that allow you to summarize or drill down as needed to analyze your fleet utilization. Monitor vehicle mileage and asset operating hours to efficiently plan preventive maintenance.
Trimble Usb Driver
- Vehicle distance, idle time and fuel consumption
- Equipment operating hours
- Movement history
- Fault codes and seatbelt alerts
- Group assets or vehicles for analysis
- Dynamic reports and dashboards
- Reporting by organization, group, and location
- Trend analysis and full fleet utilization analysis
Inspections & Maintenance
Plan ahead with fleet maintenance management software based on vehicle and equipment utilization. Assign maintenance schedules to vehicles or equipment, based on hours, utilization, or calendar intervals. Utilize vehicle fault and diagnostic information to plan service and generate alerts for upcoming maintenance. Import and customize OEM recommended maintenance plans. Use custom inspection checklists capturing photos and signatures. Auto-generate service requests for failed inspection items. Leverage utilization data to develop and assign maintenance schedules to vehicles or assets.
- Maintenance plans for equipment and vehicles
- Intervals based on hours, time, or odometer
- OEM plans and schedules
- Record maintenance performed per plan
- Capture unplanned service or maintenance
- Alerts when maintenance is due
- Vehicle diagnostic information for planning service
- Mobile inspection forms with grouping
- Capture photos and signatures
- Auto-generate service requests
Ensure the safety of your drivers and vehicles. Monitor driver behavior through in-vehicle hardware. Generate driver scorecards to evaluate driving practices. Capture speeding, maneuvering and idling patterns. Generate team and individual views of driving performance. Display harsh maneuver event locations. Provide drivers with benchmarking targets through a mobile app. Get alerts in real-time for unsafe driving practices. Use accurate information to create a safe driving culture.
- View driver behavior trends across your organization
- Generate team and site dashboards
- Dangerous location mapping to improve route plans
- Incident mapping and history capture
- Individual driver mobile scorecards
- Vehicle event intelligence
- Posted speed corrections
The Trimble PULSE driver logs app allows you to comply with the Hours of Service (HOS) and Driver Inspection Reports (DVIR) requirements of the Electronic Logging Device (ELD) mandates in the U.S. and Canada. An in-cab tablet or mobile device loaded with the electronic driver logs app allows drivers to easily submit hours of service, which ensures they are compliant with regulations. Our eld contruction solution provides alerts that notify drivers when they are approaching their drive time limits to prevent fines and penalties. The app is fully integrated with our back-office telematics software, so you can get full visibility to manage your workforce while meeting compliance requirements.
- Automatic recording of hours driven, remaining drive time, and breaks
- Vehicle inspection logs and data transfer for ease of verification
- Proactively prevent incidents by ensuring roadworthiness of vehicles and safe driving practices
- Comply with FMCSA HOS and DVIR legislation
- Enable drivers to easily enter and submit electronic daily logs from tamper-proof in-cab devices
- Ensure accuracy and quick data sharing with back office
- Use truck-specific routing and fleet navigation
Connect with APIs
Connect to other construction tools and related systems using a robust set of APIs to increase the productivity of your business – both on and off the job site.
Easily import or export fleet telematics data using the AEMP standards.
Synchronize your customer and fleet management information with your existing business systems, ERP, or dealer management systems.
Customize your Trimble asset management software installation with the help of our Professional Services team to get the most out of your construction technology and telematics solution.
Connect Your Data:
Advanced construction technology integrations to make your workflows quicker and smarter.
- Trimble ViewPoint One
Connecting your on and off-highway vehicles and equipment
This guide explores how connecting both on and off-highway fleets is paramount to minimizing downtime across a multitude of job sites. It also explores how best-in-class construction businesses tie real-time visibility of their entire fleet into daily workflows to maximize uptime with an efficient and effective workforce.
Collaborate with Asset Management Construction Technology
Shared data from Trimble’s asset management software ensures all construction project contributors have the latest information to empower their decisions and become more productive.New!
Drivers Trimble Navigation System
A new operating system technology platform that integrates data to deliver 3D productivity and real-time progress to plan into a single dashboard to increase construction productivity.
Ready to see Asset Management from Trimble in action?
No matter your role or stage in the construction project lifecycle, we can help you be more productive. Let’s chat through your needs with our product experts to show you our connected construction technology in action.