Drivers Tripp Lite

12/10/2021by admin

Info:

  1. Drivers Tripp Lite Travel Trailers
  2. Tripp Lite U209 000 R Driver
  3. Driver Tripp-lite Usa-19hs
  4. Drivers Tripp Lite Usb To Serial

Founded in 1922 in Chicago, Illinois, Tripp Lite is a leading manufacturer of products to power, connect and protect your equipment. With a large selection of connectivity products, Tripp Lite has everything from USB hubs and reversible USB cables to fiber-optic cables and over Cat5e/Cat6 signal extenders. Specifically, TRIPP LITE is not liable for any costs, such as lost profits or revenue, loss of equipment, loss of use of equipment, loss of software, loss of data, costs of substitutes, claims by third parties, or otherwise. This manual is also suitable for: Keyspan usa-19hs.

Model: Tripp Lite USB to Serial Bridge Drivers
Vendor: Tripp Lite
Version: 3.2.0.0, v.3.3.7.139Tripp
LiteOperating system: Windows XP, Windows Vista, Windows 7
Bits: 32-bit (x86), 64-bit (x64)
Driver Date: 2009-11-16
Size: 0.05 mb

Driver description

Download driver Tripp Lite USB to Serial Bridge Drivers version 3.2.0.0, v.3.3.7.139 for Windows XP, Windows Vista, Windows 7 32-bit (x86), 64-bit (x64).

Screenshot of files

File Name

Tripp_Lite_USB_3.3.7.139.zip - 64 bits (0.05 mb) v.3.3.7.139

U209000Rv-driver-WindowsVista-20071107.zip - 32-64 bits (0.17 mb) v.3.2.0.0


Please, enter the answer to the following question

Name

tripplite_usb - Driver for older Tripp Lite USB UPSes (not PDC HID)

Synopsis

tripplite_usb -h

tripplite_usb -a UPS_NAME [OPTIONS]

Supported Hardware

This driver should work with older Tripp Lite UPSes which are detected as USB HID-class devices, but are not true HID Power-Device Class devices. So far,the devices supported by tripplite_usb have product ID 0001, and the newer units (such as those with 'LCD' in the model name) with product ID 2001 require theusbhid-ups(8) driver instead. Please report success or failure to the nut-upsuser mailing list. A key piece of information is the protocol number,returned in ups.debug.0. Also, be sure to turn on debugging (-DDD) for more informative log messages. If your Tripp Lite UPS uses a serial port, you maywish to investigate the tripplite(8) or tripplite_su(8) driver.

This driver has been tested with the following models:

tripplite_usb will work if it uses one of thefollowing protocols:
• Protocol 0004
• Protocol 1001
• Protocol 2001
• Protocol 3003
On the other hand, if the web page for your UPS on the Tripp-Lite website says 'HID-compliant USB port also enables direct integration with built-in powermanagement and auto-shutdown features of Windows and MAC OS X', then you should use the usbhid-ups(8) driver instead.

Extra Arguments

This driver supports the following optional settings in the ups.conf(5) file (or with -x on the command line):

offdelay

This setting controls the delay between receiving the 'kill' command (-k) and actually cutting power to the computer.
bus
This regular expression is used to match the USB bus (as seen in /proc/bus/usb/devices or lsusb(8); including leading zeroes).
product
A regular expression to match the product string for the UPS. This would be useful if you have two different Tripp Lite UPS models connected to the system,and you want to be sure that you shut them down in the correct order.
Note

This regex is matched against the full USB product string as seen in lsusb(8). The ups.model in the upsc(1) output only lists the name afterTRIPP LITE, so to match a SMART2200RMXL2U, you could use the regex .*SMART2200.*.

productid
The productid is a regular expression which matches the UPS PID as four hexadecimal digits. So far, the only devices that work with this driver have PID0001.
serial
It does not appear that these particular Tripp Lite UPSes use the iSerial descriptor field to return a serial number. However, in case your unit does, youmay specify it here.
For more information on regular expressions, see regex(7)

Runtime Variables

ups.delay.shutdown

Drivers Tripp Lite Travel Trailers

So far, the Tripp Lite UPSes do not seem to have a serial number or other globally unique identifier accessible through USB. Thus, when monitoring severalTripp Lite USB UPSes, you should use either the bus or product configuration options to uniquely specify which UPS a given driver instance shouldcontrol.

For instance, you can easily monitor an OMNIVS1000 and a SMART1500RM2U at the same time, since they have different USB Product ID strings. If you have twoSMART1500RM2U units, you would have to find which USB bus number each unit is on (via lsusb(8)), which may result in ambiguities if the available USB ports areon the same bus.

Some of the SMART*2U models have an ID number, but because this ID is not exposed as a USB string descriptor, there is no easy way to use this ID todistinguish between multiple UPS units on a single machine. The UPS would need to be claimed by the driver in order to read this ID.

Author

Written by Charles Lepple, based on the tripplite(8) driver by Rickard E. (Rik) Faith and Nicholas Kain. Please do not email the authors directly -use the nut-upsdev mailing list.

A Tripp Lite OMNIVS1000 was graciously donated to the NUT project by Bradley Feldman (http://www.bradleyloritheo.com)

Tripp Lite U209 000 R Driver

Drivers tripp lite usb to serial

Driver Tripp-lite Usa-19hs

See Also

The core driver:

Drivers Tripp Lite Usb To Serial

Other drivers for Tripp-Lite hardware:

regex(7), lsusb(8)

Internet Resources

The NUT (Network UPS Tools) home page: http://www.networkupstools.org/

Comments are closed.