Stenocast Port Devices Driver

12/10/2021by admin
  1. Stenocast Port Devices Drivers
  2. Stenocast Port Devices Driver Device
  3. Stenocast Port Devices Driver License Test
  4. Stenocast Port Devices Driver Updater
  5. Stenocast Port Devices Driver

Korg USB-MIDI Driver for Windows XP

Drivers Catalog ⇒ USB Devices ⇒ StenoCast ⇒ StenoCast USB Serial Converter A Drivers Installer for StenoCast USB Serial Converter A If you don’t want to waste time on hunting after the needed driver for your PC, feel free to use a dedicated self-acting installer. For most devices, the Ports device setup class and the Serial function driver provide the functionality required to operate serial ports and COM ports. To install serial ports and COM ports using these system-supplied components, do the following.

The first time you connect the Korg USB MIDI Device to the USB port of your computer, the default USB-MIDI driver for Windows will be installed automatically. If you want to use the Korg USB-MIDI Driver for Windows XP, use the following procedure to reinstall the driver.

DriverHive is a driver updater service that will scan your computer's installed devices, identify the best fitting drivers and provide them in an easy, convenient format. Individual drivers may be available on manufacturer websites at no charge.

The driver must be installed separately for each USB port you use. If you connect the Korg USB MIDI Device to a USB port different than the one you used when installing the Korg USB-MIDI Driver, you will need to reinstall the Korg USB-MIDI Driver using the same procedure.

  • In order to install (or uninstall) the driver in Windows XP, you must have Administrator privileges. For details, contact your system administrator.
  • If you encounter problems during installation, you may need to make settings so that Windows will not stop you from installing the driver due to its lack of a digital signature. For more information, see Allowing installation of an unsigned driver.
  • This driver is for Windows XP and Windows XP x64 Edition only. It cannot be used in Windows 95/98/Me.
  • Both 64bit application and 32bit application can't access MIDI IN ports of the same USB MIDI Device simultaneously.
  • The driver for windows XP x64 Edition is a beta version. If any bugs are found, please report them to: [email protected]
    We appreciate your bug reports so that we can refine our software in the future.
    Please note that this address is for unsupported software only, so e-mail will NOT be responded to.

You can install/uninstall the Korg USB-MIDI Driver using the tools.
wInstalling the Korg USB-MIDI Driver using a tool
wUninstalling the Korg USB-MIDI Driver using a tool
If you want to install/uninstall the Korg USB-MIDI Driver manually, please see the following sections.
wInstalling the Korg USB-MIDI Driver manually
wUninstalling the Korg USB-MIDI Driver manually

n Installing the Korg USB-MIDI Driver using a tool

1.

Use a USB cable to connect the Korg USB MIDI Device to your computer, and turn on the power of the Korg USB MIDI Device.

Windows will detect the connection with the Korg USB MIDI Device.
Then the default driver will be installed.


2.

Excute EzSetup.exe.

The list in the upper part of the window shows the KORG USB-MIDI devices that are currently connected to your PC. The lower area shows the software version of the KORG USB-MIDI Driver you are about to install.

From the list, choose the KORG USB-MIDI device that is currently connected to your PC, and click Install.
Driver installation will begin.


3.
If a dialog box appears, warning you that the driver is not digitally signed, click Continue Anyway.


4.

When the dialog box indicating that installation is completed appears, click Finish.

If a dialog box recommends that you restart Windows, click Yes to restart.



n Uninstalling the Korg USB-MIDI Driver using a tool

1.

Excute UnInstDrv.exe.

Click Next.


2.

A list of currently installed KORG MIDI devices will be displayed.
Add a check mark only to the MIDI device you want to remove.

Be aware that all MIDI devices with a check mark will be removed.

Click Next.


3.
A dialog box will ask you for confirmation. Click OK.


4.
Click Finish to complete the procedure.
To ensure that the driver removal has taken effect, restart Windows.

n Installing the Korg USB-MIDI Driver manually

1.

Use a USB cable to connect the Korg USB MIDI Device to your computer, and turn on the power of the Korg USB MIDI Device.

Windows will detect the connection with the Korg USB MIDI Device.
Then the default driver will be installed.


2.

From the taskbar, click Start and then click Control Panel to open the Control Panel.

From the Control Panel, start up Sounds and Audio Devices, and click the Hardware tab.

From the list of devices, select USB Audio Device.
Make sure that the 'Location' field below the list shows the name of the Korg USB MIDI Device, and click the Properties button.


3.
The 'USB Audio Device Properties' dialog box will appear. Click the Driver tab, and then click the Update Driver button.


4.
The 'Hardware Update Wizard' dialog box will appear.

In the 'Can Windows connect to Windows Update to search for software?' field, click 'No, not this time' and then click Next.


5.

In the 'What do you want the wizard to do?' field, click 'Install from a list or specific location' and then click Next.


6.
In response to 'Please choose your search and installation options, you must click 'Don't search. I will choose the driver to install', and then click Next.


7.
In response to 'Select the device driver you want to install for this hardware,' click the Have Diskbutton.


8.
You will be asked for the name of the folder. Insert the CD-ROM included with the Korg USB MIDI Device into your CD-ROM drive. Then type the name of the folder D:Driver that contains the KORG USB MIDI Driver, and click the OK button.
This example is for when your CD-ROM drive is drive D. You will need to change this as appropriate for your computer system; for example, if your CD-ROM drive is drive E, then replace D: with E: in the folder name you type.


9.
Make sure that the name of the Korg USB MIDI Device is displayed as the Model, and click Next to begin installing the driver.


10.
If a dialog box appears, warning you that the driver is not digitally signed, click Continue Anyway.


11.
When the dialog box indicating that installation is completed appears, click Finish.
If a dialog box recommends that you restart Windows, click Yes to restart.


n Uninstalling the Korg USB-MIDI Driver manually

1.

From the taskbar, click Start and then click Control Panel to open it.

From the Control Panel, open Sounds and Audio Devices, and click the Hardware tab.

From the list of devices, select the name of the Korg USB MIDI Device and click the Properties button.


2.
The Korg USB MIDI Device Properties dialog box will appear.
Click the Driver tab, and click the Uninstall button.


3.
A dialog box will ask you for confirmation.
Click the OK button.

n Allowing installation of an unsigned driver

If your computer has been set so that drivers without a digital signature cannot be installed, you will not be able to install the Korg USB-MIDI Driver. Use the following procedure to change your settings so that you can install the driver.

1.

On the taskbar, click the Start button and then Control Panel to open the Control Panel.

From the Control Panel, open System and click the Hardware tab.
Then click the Driver Signing button.


2.

If What action do you want Windows to take? is set to Block, you will not be able to install the driver. Choose Ignore or Warn, and then click OK.

If necessary, change this setting back to its original setting after you have installed the driver.

'); else document.write('); //-->

The utilities below are compatible with Luminex, Diamante & Wave


Stenograph Writer Utility Installation
Size: 129 MB Date: 3-06-20

Stenocast port devices driver license test

Compatible with: Luminex II, Luminex, Luminex CSE, Diamante and Wave writers.
Use this download to install the Stenograph Writer Utility software. The Stenograph Writer Utility software contains the USB Driver Installation files and all utility software. Some of the components of this package can be downloaded individually via the indented links below:

Stenograph Writer USB Drivers
Size: 3.23 MB Date: 8-27-15

This file contains the USB drivers for Stenograph's writers. The Stenograph Install Drivers program runs a wizard to easily install your Stenograph writing machine USB drivers. The USB drivers are for Stenograph writers (Luminex, Diamante, Wave™, élan Mira, élan Cybra, Stentura Fusion and Stentura Protégé) for use with Case CATalyst and other compatible CAT software.

Writer Manager Utility for Luminex II, Luminex and Luminex CSE
Users Size: 2.8 MB Date: 3-06-20

Use the Writer Manager Utility to backup and restore Luminex II settings files.
The Writer Manager Utility provides a quick way to create a backup of steno machine log files. Log file backup is compatible with Luminex II, Luminex and Luminex CSE. In the rare even you receive an error on the writer, Technical Support may ask you to back up the log files and send them to Stenograph.

TrueView® Utility for Luminex/Diamante/Wave
Users Size: 2.64 MB Date: 8-27-15

TrueView® enables you to display a graphical representation of steno outlines and their TrueStroke data generated by the Luminex, Diamante and Wave writers. TrueView helps you analyze your writing results and to understand how the writer has interpreted your strokes. TrueView files are saved and can be reopened for review by scrolling and searching for specific steno or timestamps.

Stenocast port devices driver device

Luminex/Diamante/Wave Splash Screen Loader Utility
Size: 4.37 MB Date: 8-27-15

The Splash Screen Loader Utility allows you to see a photograph of your own choice upon startup of the Diamante. A collection of stock photos is included if you wish to use one of them. Click the above file link and select the Save option. Specify where you want to save the it; for example, the Windows Desktop. After it is saved, unzip it and double click the Splash Loader to begin. Read the Splash Screen Loader PDF document for detailed instructions.

Luminex/RTF2Writer Utility for installing a non-CATalyst Dictionary in a Writer
Size: 948KB Date: 8-27-15

Even if you don’t have Stenograph’s Case CATalyst software, you can enjoy instant translation of your written steno into text on the Luminex, Diamante, élan Mira or Stentura Fusion display screen. Simply create an RTF-CRE personal dictionary and up to seven job dictionaries from your CAT software and use the instructions and the RTF2Writer utility provided.

DateTime to Stentura Format Utility for non-CATalyst CAT Software
Size: 1.15MB MB Date: 8-27-15

Even if you don’t have Case CATalyst 7.02 or higher, you can use the DateTime format in your Luminex, Diamante, élan Mira A3 or Stentura Fusion writer. The DateTime To Stentura program converts Stenograph Writer files that are stored in the date and time format (i.e. 20090710-084528) to Stentura compatible format (File.00X). Once converted, they can be read into your CAT software as usual.

Luminex/Diamante Backup SD Card Reader Utility
Size: 1.4 MB Date: 8-27-15

The Luminex/Diamante Backup Card will only be needed for the rare occasion when a job cannot be found on the Data SD card or internal memory. Click the above file link and select the Save option. See the provided instructions for details.

Wave Get Support Info Utility
Size: 242 KB Date: 8-27-15

In the rare event you experience an issue with your Wave, a log file is created for that issue. The Get Support Info utility provides a method of retrieving the log files from the Wave to your computer to assist Stenograph’s Technical Support Department in diagnosing the issue.


Stenocast port devices driver license test


BlueSoleil Version7.0.496.9 (Luminex Users Only, Requires Latest Luminex Build)

Size: 111 MB Date: 8-8-17

Bluetooth software for Luminex Bluetooth Kit. To install this update please follow these instructions:

Stenocast Port Devices Drivers

1. Uninstall any previous versions of BlueSoleil on your computer. Click Start > Settings > Control Panel and then the option to uninstall a program.

2. Right click the BlueSoleil Version 7.0.496.9 and select Save Target As or Save As to save the zip file to your computer.

3. Open the install file and double click the Setup.exe file and follow the prompts.

4. Once installed, insert the Bluetooth adapter into a USB port and reboot your computer.

Stenocast Port Devices Driver Device

Additional information can also be found in the Bluetooth Wireless Guide.


BlueSoleil Version7.0.348.1 (Diamante Users Only)

Size: 60 MB Date: 5-5-10
Bluetooth software for Diamante Bluetooth Kit. To install this update please follow these instructions:

Stenocast Port Devices Driver License Test

1. Uninstall any previous versions of BlueSoleil on your computer. Click Start > Settings > Control Panel and then the option to uninstall a program.

2. Download and save the update file on your computer.

3. Open the Install folder and double-click the setup.exe file to install the software.

The file and additional information can also be found on BlueSoliel's Web site.


IMPORTANT: Please call support for installation help


Stenograph Writer USB Protocol
Size: 10.3 KB Date: 2-08-16

Attention CAT software vendors: The Stenograph Writer USB Protocol is now available for all CAT vendors to implement into their software. Download this zip file to receive the protocol description and sample code.

Stenocast Port Devices Driver Updater

Bluetooth Wireless Guide
Size: 758 KB Date: 5-20-09

PDF version of the Stenograph Bluetooth Wireless Guide for the élan Mira, Stentura Fusion, élan Cybra and Stentura Protégé.

élan Mira WiFi Wireless Communication Guide
Size: 994K Date: 05-28-08

PDF version of the élan Mira WiFi Wireless Communication Guide.


The utility below is for Case CATalyst

OpusToWav Conversion Program
If you are not using Case CATalyst Version 20 or higher and have been given an Opus audio file, you may use the OpusToWav Conversion Program to convert the Opus audio file to Wav format. The Wav format file will not automatically synchronize to the Case CATalyst transcript. If you are using Case CATalyst Version 20 or higher, there is no need to convert the Opus file to Wav format. The Opus file will play and be synchronized with the Case CATalyst transcript. Instructions for using the OpusToWav Conversion Program are available in the Readme file provided with the download.

OpusToWav.zip
Size: 2MB Date: 02-28-19

Stenocast Port Devices Driver


Comments are closed.